Portable Soil Sampling Drill Rig

A handheld portable soil sampling machine

Category：

Soil sampling drilling rig

Keywords：

Soil drilling rig

Tel：

+8615376211860

Related Products

1. Product introduction

The single-person handheld soil sampling drill is a lightweight soil collection drill designed based on large-scale hydraulic, gasoline, and pneumatic drills. Even drillers without operating experience can operate it with simple training. The sampling process is extremely simple, and one or two people can complete the operation of the equipment. There is no need to add water during the entire drilling process, ensuring the quality of the samples (no pollution, no disturbance).

Compared with conventional large drilling rigs, soil sampling drills are more portable and simpler to operate. Non-professional personnel can easily operate the equipment. This equipment is a good choice in some project sites where the depth requirements are not high (within 10 meters), the terrain is relatively complex, and large equipment is difficult to reach.

Compared with traditional hand drills, soil sampling drills can drill deeper, sample more efficiently, and obtain undisturbed, basically undisturbed and compressed (depending on the terrain) soil samples. This equipment is the best choice for projects with a sampling depth of more than half a meter and high requirements for the quality of soil samples (original, undisturbed, and uncompressed).

2. Product parameters

1. Sampling depth: 1-10 meters (optional)

2. Vibration frequency: 1300 times/minute

3. Power: 1.6 horsepower (7000rpm)

4. Engine type: single-cylinder two-stroke engine

5. Fuel consumption: no more than 0.6L/h

6. Weight: 20.2kg (host)

7. Sample tube specifications: inner and outer diameter not less than 35mm/40mm; length not less than 1.00 meters/tube

8. The sampling depth can be connected to the drill pipe for one-time sampling without lifting the drill midway.

9. Pull-out device: rapid pull-out, speed not less than 3.00 m/min

3. Product features

● The footage is fast and the sample remains in its original state without any disturbance!

● You can use the built-in PVC sampling tube to take samples, or you can take samples directly!

● The ideal depth for regular soil sampling is 1-5 meters, and the soft soil layer can reach 10 meters!

●Hand-pull start, instant stop trigger button, spring isolation anti-shock handle!

● The puller adopts a more reasonable ergonomic design and can be pressed by hand or foot!

4. Standard configuration

One gasoline-powered engine, one engine tool kit, optional standard soil drill bits and hard soil drill bits, 2 drill pipes not less than 1 meter, 2 plastic sample tubes not less than 1 meter, gloves, special extraction equipment 1 set,