Core drilling rig

The fully hydraulic core drill is a kind of equipment for coring and drilling in solid ore deposits. It adopts hydrostatic transmission to reduce the complicated mechanical transmission chain. It has the characteristics of light weight, high efficiency and simple operation.

Category：

Diamond Mining Drill Rig

Keywords：

Core Drilling Rig, Diamond Core Drilling Rig, Crawler Core Drilling Rig

Tel：

+8615376211860

Related Products

The fully hydraulic core drilling rig is a drilling rig independently developed by our company.

1. The drilling rig adopts a fully hydraulic static transmission drive mode.

2. The drilling rig can be mechanically two-speed plus stepless speed regulation, and the maximum torque can reach 2600N.m.

3. It is driven by an axial piston pump and an oblique axis piston motor.

4. It is equipped with a lateral translation mechanism for the power head, and the mast can slide as a whole by using a cylinder to rise and fall, and can be used for drilling within a range of 0-90°.

It is mainly suitable for drilling and coring of solid ores, and can also be used for engineering geological surveys, shallow oil, natural gas, and groundwater drilling surveys, as well as tunnel ventilation, drainage, and dam grouting and other engineering drilling. The drilling rig adopts a fully hydraulic static hydraulic oil drive, and the power head rotation is driven by an axial piston pump and an oblique axis piston motor, with mechanical two-speed plus stepless speed regulation, and an advanced structure. The power head adopts a cylinder chain double-speed feeding mechanism, which has smooth and reliable movement. It is equipped with a lateral translation mechanism for the power head. The mast adopts a cylinder to lift and lower and can slide as a whole, and can drill holes within the range of 0-90°. The hydraulic system adopts load-sensitive control, with high working efficiency and large torque. The drilling rig is equipped with hydraulic horse clamps, hydraulic leveling legs, retractable masts and other devices to facilitate rapid positioning of the drilling rig. It is equipped with a wireless remote control crawler chassis, which is suitable for various terrains. The crawling of the drilling rig can be controlled within a safe distance to prevent sudden danger.

Drilling rig model

YX-10

Drilling capacity

BTW (m)

1400

NTW (m)

1200

HTW (m)

1000

PQ (m)

600

Hydraulic system

Rated pressure MPa

32+20+20+20

Cooling method

Secondary air cooling + primary water cooling

Engine parameters

Model

Weichai 129Kw six-cylinder

Rated power Kw

129

Rated speed rpm

2400

Power head parameters

Maximum torque N.m

2600

Maximum speed rpm

1400

Feed stroke m

2000/3500 (optional)

Through hole diameter mm

Lifting force kN

360

Thrust force kN

180

Rope core winch parameters

Rope capacity m

1200

Lifting Lift kN

Lifting speed m/min

110

Wire rope diameter mm

Mast parameters

Total height/m

8.5

Drilling angle °

0-90

Sliding stroke mm

1200

Gripper parameters

Through hole 130mm

Track parameters

Maximum climbing angle °

Maximum driving speed km/h

Transportation dimensions

Length * width * height mm

5600*2200*3000

Total machine weight (t)

7.3

TEL: +8615969957058 +8615376211860

E-mail: flydragonsd@gmail.com